Apportion your budget evenly and wisely – Avoid wasting most money on the display and treating the audio as an afterthought. Try watching a great movie with the sound turned off, and then try listening without any picture and you may see why both areas are equally important.
Source quality – feeding your equipment – The standard of the source determines the enjoyment of all things you see and hear. Look for a machine supplying the best performance for basic picture and sound instead of seldom-used features.
Speaker positioning – For ideal front speaker positioning, set-the front left and right for good stereo reproduction then site the centre speaker on the same height (or as near as is possible) as the tweeter on the front left and right speakers.
Ideal sub location – For the greatest site to get a sub woofer, install it in the listening position then walk round the room until you find the spot where most bass is heard. This is the ideal location for the sub.
Setting speaker levels – Although individual speaker levels may be setup by ear, an infinitely more accurate result (and a more believable sound) can be obtained having a sound pressure level meter. These are generally very user friendly and relatively cheap at approx £40.
Rear speaker settings – If individual sounds from rear speakers attract your attention try lowering their level in the set-up of your own processor or increasing their delay. Some film recorded in a heavy ambient environment (like a church or cathedral) is ideal for this.
Positioning of display device – When positioning a TV or plasma screen avoid reflections on the glass from lights or windows. These are generally best observed with the set turned off. Do not install your screen too high (usually above fire places) since it may cause a sore neck after long periods of viewing.
Customising default display settings – Factory settings on TVs are made to look nice in a store, not your family room. Invest in a test DVD including Video Essentials and follow the instructions carefully to find the best results.
Video connections – Normal analogue interconnects will never function correctly with video signals. Ask your dealer for 75ohm coaxial cables for the video connections.
Get assistance from an expert – your neighborhood dealer. For ultimate performance hire a specialist dealer or Home Theater Installation Hertfordshire to put in your cinema. Their services tend to be great affordability along with a professional set-up will yield probably the most enjoyable system. One more problem arises though; Sound waves can travel through any opening with very jzvkmw loss. And to top it off, a little hole in a barrier would transmit nearly as much sound as a much larger hole. This acoustic property of sound could be a serious problem in a home cinema installation, where high quality construction is necessary. Which is where acoustical gaskets come into play. A home cinema door, to become effective, the seals around the head, jamb and sill should be complete and air-tight.
Quite simply, the quality of the acoustical gasket in a home cinema installation, would determine how close the specific sound performance from the door, should come for the published specification. A hi-end home cinema design should take every piece of information under consideration, to make certain a hi-end acoustical result.